How to find the cheapest fix rubber bracelet website+copd rubber bracelets

Normally you can buy the silicone wristband at below common dimensions. General size (adult): 8 "(L) x 1/2" (W) x 1/16"(H) or (202 MM x 12 MM x 2 MM) Women"s Dimensions (Adults): 190 MM x 12MM x 2MM General size (children): 7"(L) x 1/2"(W) x 1/16"(H) or (180MM x 12MM x 2MM) 61/2 "(L) x 1/2" (W) x 1/16"(H) or (165MM x 12MM x 2MM) But we also can offer below extra large silicone wristbands. 8.25 "(L) x 1/2" (W) x 1/16"(H) or (210 MM x 12 MM x 2 MM) 8.65 "(L) x 1/2" (W) x 1/16"(H) or (220 MM x 12 MM x 2 MM) 9 "(L) x 1/2" (W) x 1/16"(H) or (230 MM x 12 MM x 2 MM) 9.85 "(L) x 1/2" (W) x 1/16"(H) or (250 MM x 12 MM x 2 MM) For the width,you can choose more than 1/2" (12mm). Such as 3/5"(15mm),3/4"(19mm) and 1"(25mm). Surely,if you have other extra large size need to do. We also can make the mould to do for you! So,any size will be ok!       silicone-wristband-usb-flash-drivecheap-silicone-wristbands-canada

fix rubber bracelet

If the wristband has printed details on it and are not embossed or debossed, be careful not to scrub away the markings.Silicone Bracelet wear for a long time, of course, will not be as bright as new, there will be dirty time, then, how should we clean and maintain the silicone wristbands? 1. Silicone hand rings are dirty. The most effective way is to rinse them with clean water. 2. The grease on the silica gel Bracelet should be coated with soapy water, wipe off the stain with a soft cloth, and then rinse off with clean water. Dry the water with napkins or soft cloth and blow it in a cool and ventilated placecopd rubber bracelets. 3. When encountering stubborn stains, they can be rubbed with cotton swabs dipped in alcohol. Above is the whole content of how to clean the silica gel bracelet. The author thinks that the first is maintenance, the second is cleaning, and the other is not to wash too frequently. You can also try using an eraser. Or clean with toothpaste. Look at your convenience with transparent adhesive or tape sticking.             design-your-own-silicone-wristbandschristian-silicone-wristbands

vide the CDR or AI file. If not , we designer can make it according to customer’s request for free. 2 make the mould The mould is made by the artwork that is confirmed by custocopd rubber braceletsmer. A mould is made from copper usually. It is a necessary step to start production. 3 Color and rubber mixing This is the step to prepare the raw material of the bracelet.  We have to make the color as the pantone color customer wants. 4 weighing Commonly 5.5g per bracelet. 5 start production Set the mould on the machine and warm up to needed tempreture. 15k pcs bracelets can be done in 1 day by 1 machine. 6 edge cutting Use the machine to cut the extra part of the bracelet and divice the bands made by one mould. 7 quality inspection The defective must be picked out before packing. 8 packing and dilivery The bulk packing is 100pcs/ bag, 2500pcs/ctn. There can be individually wrapped if customer request. We have the confirm the dilivery details before dispatching.       cool-bracelets-to-make-with-rubber-bandsdesign-your-own-rubber-bracelet-online